产品型号

Neck-reduced floating oil hose

Application: Floating offshore petroleum hose is designed for transporting crude oil and liquid petroleum products between loading and unloading vessels on offshore mooring systems.

Main Carcass Main Liner/Inner Tube: Smooth, oil and fuel resistant pure seamless and extruded acrylonitrile butadiene rubber (NBR); safety liner

Shell: Smooth black synthetic rubber, resistant to abrasion, oil, sea water and sunlight. Spiral orange band.

Fittings: Terminal connections built into the fabrication process. ASME B 16.5 150 lb or 300 lb weld neck flat or raised face upon request.

Testing: All tests as per GMPHOM 2009 and customer details.

Features: 1. Connect rear manifold and tail pipe 2. The lifting lug should be able to withstand the load, the minimum breaking load is 12” = 100KN 16” = 150KN 20” = 200KN 3. Rated working pressure

Application: Floating offshore petroleum hose is designed for transporting crude oil and liquid petroleum products between loading and unloading vessels on offshore mooring systems.

Main Carcass Main Liner/Inner Tube: Smooth, oil and fuel resistant pure seamless and extruded acrylonitrile butadiene rubber (NBR); safety liner

Shell: Smooth black synthetic rubber, resistant to abrasion, oil, sea water and sunlight. Spiral orange band.

Fittings: Terminal connections built into the fabrication process. ASME B 16.5 150 lb or 300 lb weld neck flat or raised face upon request.

Testing: All tests as per GMPHOM 2009 and customer details.

Contact Now

Parameter

Reduced diameter hoses can be provided to match other hoses including
Nominal inner diameter mm	200/150(8/6")	250/200(10/8")	300/250(12/10")
	400/300 (16/12")	500/400 (20/16")	600/500(24/20")
The reduction can be done on the hose body (which can be on the reduced steel core), or on the larger inner diameter end of the end fitting, or a combination of these reduction processes can be used to reduce the hose body, at which time the weight and size will change.

Note: The actual parameters are subject to the final atlas

Reduced diameter hoses can be provided to match other hoses including
Nominal inner diameter mm	200/150(8/6")	250/200(10/8")	300/250(12/10")
	400/300 (16/12")	500/400 (20/16")	600/500(24/20")
The reduction can be done on the hose body (which can be on the reduced steel core), or on the larger inner diameter end of the end fitting, or a combination of these reduction processes can be used to reduce the hose body, at which time the weight and size will change.